Installation Instructions

Medal Hanger Installation

All plaques come with installation instructions (as described below), nylon wall spacers, wall plugs, and mounting screws

All display plaques have two mounting holes.

When attaching to the wall it is important to use a spirit level to ensure the horizontal.

With the display in position mark the site of each hole with a pencil.

Using a 5mm drill bit, drill holes at the two pencil marks.

Push in the wallplugs until flush with the surface of the wall.

Attach the display to the wall using the panhead screws, sliding the nylon spacers onto the end of the screws from the back of the display. Screw the display onto the wall and then....




© 2016 Torchbearer Sports Ltd